Blanco Diamond 33" Silgranit 1-3/4 Bowl Undermount Kitchen Sink
Blanco Diamond 33" Silgranit 1-3/4 Bowl Undermount Kitchen Sink
Availability:
Estimated Arrival: Between Jul 31 and Aug 05.
Couldn't load pickup availability
-
The Blanco Diamond 33" Silgranit Kitchen Sink offers superior strength and resilience. Made in North America of SILGRANIT, a high-grade granite composite, this double bowl kitchen sink is highly heat, scratch and stain resistant, while its non-porous surface is food-safe and easy to clean. With an undermount installation, it fits in a minimum cabinet size of 36''. Enjoy superior performance and lasting beauty with the Blanco Diamond Kitchen Sink.
Features:
-
- Diamond kitchen sinks are proudly made in North America
- Double bowl configuration allows for easy multi-tasking
- Made of SILGRANIT, a high-quality granite composite
- Heat, scratch and stain resistant
- Non-porous surface is food-safe and easy to clean
- Undermount installation
- Minimum cabinet size: 36''
-
- Undermount installation only
- Minimum cabinet size: 36''
- Cut-out Dimensions:
- Cut-out Length: 29.87''
- Cut-out Width:19.35''
- Cut-out Below Counter Depth: 10.29''
- Left Sink Bowl Dimensions:
- Sink Bowl Length (left-to-right): 16.63''
- Sink Bowl Width (front-to-back): 18.88''
- Sink Bowl Depth: 9.5''
- RightSink Bowl Dimensions:
- Sink Bowl Length (left-to-right): 12.5''
- Sink Bowl Width (front-to-back): 17''
- Sink Bowl Depth: 8''
- Drain hole compatible with 3.5'' strainers or waste flanges
- Codes/Standards: CSA B45.8-18/IAPMO Z403-2018
-
SPECIFICATION SHEET
More:
Shipping is calculated at checkout. Free delivery to all Continental United States.
Questions & Answers
Have a Question?
-
We are reinstalling a blanco diamond silgranit II 1& 3/4 undermount sink we bought a couple of years ago into a butcher block countertop. Is there a cut out template that we can get. We no longer have the original one.
Hi Noue,
Thank you for your question. We have the DXF files as a link on the product page. If you download that file, you'll get a 1:5 drawing along with the reveal details. I suggest you turn the sink upside-down and draw the profile on paper, then adjust it all around by the amount of the reveal. Do you think that will work for you? I know the cutout comes with the sink, but I'll have to check with the manufacturer to see if there's a way to get it as a separate item. I hope this helps. Please reach out if you have any further questions. Kind regards, Clare